Normal Operation
WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
The restraints control module (RCM) monitors the safety belt buckle switch circuits for faults. If the RCM detects an open circuit or short to voltage fault, it will store DTC B2691 in memory and send a message to the instrument cluster (IC) module to illuminate the air bag warning indicator.
- DTC B2691 Seat Belt Buckle Switch Circuit Fault, Front Driver's Side - If the RCM detects an open or short to battery on the driver safety belt buckle switch circuit, it will set this DTC.
This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Driver safety belt buckle assembly
- RCM