LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Rear Drive Axle/Differential) >> In-Vehicle Servicing >> Differential Housing Cover >> Removal

Differential Housing Cover: Removal

WARNING: This page is about a different variant/trim than selected.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
  2. Remove the 10 bolts and the rear differential housing cover.
    • Drain the differential fluid from the housing.
    3. Fig 1: Locating Rear Differential Housing Cover Bolts
    GF0029549Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals