LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 981 (Electronic Engine Controls) >> Removal And Installation >> Variable Camshaft Timing (VCT) Oil Control Solenoid >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Lincoln MKZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the LH or RH valve cover. For additional information, refer to ENGINE - 3.5L article.
  2. Remove the bolt and the variable camshaft timing (VCT) oil control solenoid.
    • To install, tighten to 10 Nm (89 lb-in).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals