Crankshaft Front Seal: Removal

WARNING: This page is about a different car, the 2008 Lincoln MKZ. However, it is still accessible from the selected car via links, so may be relevant.

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
Remove the crankshaft pulley. For additional information, refer to Crankshaft Pulley .
Using the Oil Seal Remover, remove and discard the crankshaft front seal.
- Clean all sealing surfaces with metal surface prep.

Fig 1: Removing Crankshaft Front Seal Using Special Tool (303-409)

Courtesy of FORD MOTOR CO.