LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1729 (Interior Trim And Ornamentation) >> Removal And Installation >> Door Trim Panel - Rear >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Use care not to damage the trim panel covers.
  1. Remove the 2 assist handle covers.
  2. Remove the 2 screws and remove the assist handle.
  3. Remove the door handle cup screw cover and screw.
  4. Remove the rear door trim panel lower screw.
  5. Disconnect the 2 electrical connectors and remove the rear door trim panel.
  6. To install, reverse the removal procedure.