Removal And Installation
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the window control switch plate and position it aside.
- Disconnect the 4 electrical connectors and remove the switch plate.
- Remove the 2 assist handle screw covers and the door handle cup screw cover.
- Remove the 2 assist handle screws and the door handle cup screw.
- Remove 3 front door trim panel screws.
- Disconnect the 3 electrical connectors and remove the front door trim panel.
- To install, reverse the removal procedure.
NOTE:
Use care not to damage the trim panel covers.