LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1428 (Fuel System - General Information) >> General Procedures >> Spring Lock Couplings >> Connect

Spring Lock Couplings: Connect

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Lubricate the fuel tube with clean engine oil.
  1. Align and push the spring lock coupling onto the tube until you hear a click.
    2. Fig 1: Aligning & Pushing Spring Lock Coupling Onto Tube Until You Hear A Click
    GF0030176Courtesy of FORD MOTOR CO.
  2. Pull on the coupling to make sure it is fully engaged.
  3. Connect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES article.
scientia non olet · About LEMON Manuals