LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1423 (Manual Transmission External Controls System) >> Removal And Installation >> Gearshift Lever >> Removal

Gearshift Lever: Removal

WARNING: This page is about a different car, the 2009 Mercury Milan and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the console. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.
  2. Disconnect the shift cable ends at the shift and select levers.
    3. CAUTION: Carefully disconnect the cable from the shift lever base. Do not damage the shift cable retainers.
  3. Disconnect the gearshift cables from the gearshift lever base.
    4. Fig 1: Locating Gearshift Cables
    GF0030108Courtesy of FORD MOTOR CO.
  4. Remove the 4 gearshift lever nuts.
  5. Remove the gearshift lever assembly.
scientia non olet · About LEMON Manuals