LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1422 (Automatic Transmission Cooler - Transaxle/Transmission Cooling) >> Diagnostic And Testing >> Transaxle Cooling - Aisin AW21 >> Check Transmission Fluid Level and Condition >> Adding Transmission Fluid

Adding Transmission Fluid

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: MERCON® V, MERCON® SP, Motorcraft Premium Automatic Transmission Fluid, Motorcraft Continuously Variable Chain Type Transmission Fluid and FNR5 Automatic Transmission Fluid are not interchangeable transmission fluids. The use of any fluid other than what is recommended for this transaxle will cause transaxle damage.

If transmission fluid needs to be added, add transmission fluid in 0.25L (1/2 pt) increments through the indicator tube. Do not overfill the transaxle. For transmission fluid type, refer to the SPECIFICATIONS .

scientia non olet · About LEMON Manuals