LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1419 (Automatic Transmission External Controls) >> Diagnostic Tests >> External Controls >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern by operating the system.
  2. Visually inspect for obvious signs of mechanical or electrical damage.
  3. If an obvious cause for an observed or reported concern is found, correct the cause before proceeding to the next step.
  4. If the concern is not visually evident, verify the symptom. Go to Symptom Chart - External Controls  or Go to Symptom Chart - NVH .
VISUAL INSPECTION CHART

Mechanical Electrical
  • Selector lever cable
  • Manual control lever
  • Transmission Control Module (TCM) out of adjustment (6-speed transaxle)
  • Selector lever slider bunching or binding
  • Battery Junction Box (BJB) fuse 14 (15A)
  • Connections
  • Wiring harness
  • Brake Pedal Position (BPP) switch
  • Brake Shift Interlock Actuator (BSIA)
  • Transmission Control Switch (TCS) (MKZ)