LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1415 (Instrument Panel & Console) >> Removal And Installation >> Console - Overhead >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Fusion shown, Milan and MKZ similar.
  1. Open the overhead console compartment door.
  2. Fig 1: Locating Overhead Console Compartment Door
    GF0028442Courtesy of FORD MOTOR CO.
  3. From inside the compartment, remove the 2 screws.
  4. Remove the overhead console.
    • Disconnect the electrical connectors.
  5. To install, reverse the removal procedure.