Wiper Blade and Pivot Arm Adjustment
WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- Cycle and park the windshield wipers.
- Verify that the RH and LH wiper blades are located at the alignment marks on the glass.
- If necessary, remove the nuts and the windshield wiper pivot arms and reposition them to the correct locations.
- To install, tighten to 20 Nm (15 lb-ft).