LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1410 (Automatic Transmission - FNR5) >> In-Vehicle Servicing >> Halfshaft Seal - RH >> Removal

Halfshaft Seal - RH: Removal

WARNING: This page is about a different car, the 2009 Mercury Milan and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the RH halfshaft. For additional information, refer to FRONT DRIVE HALFSHAFTS article.
    2. NOTE: Be careful not to damage the case while removing the seal.
  2. Using a suitable tool, remove the RH differential fluid seal.
    3. Fig 1: Locating Differential Fluid Seal
    GF0029807Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals