LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1410 (Automatic Transmission - FNR5) >> Disassembly And Assembly Of Subassemblies >> Torque Converter >> Assembly

Torque Converter: Assembly

WARNING: This page is about a different car, the 2009 Mercury Milan and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the torque converter.
    2. Fig 1: Locating Torque Converter
    GF0029844Courtesy of FORD MOTOR CO.
  2. Install the transaxle. For additional information, refer to Transaxle .
scientia non olet · About LEMON Manuals