LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1410 (Automatic Transmission - FNR5) >> Diagnostic Tests >> Visual Inspection >> Selector Lever Linkage Check

Selector Lever Linkage Check

WARNING: This page is about a different car, the 2009 Mercury Milan and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Check selector lever linkage adjustment by matching the detents in the selector lever with those in the transaxle. If they match, the error is in the indicator. Do not adjust the selector lever linkage.

Hydraulic leakage at the manual control valve can cause delay in engagements and slipping while operating if the selector lever linkage is not correctly adjusted; refer to AUTOMATIC TRANSAXLE/TRANSMISSION EXTERNAL CONTROLS article for selector lever linkage adjustment.

scientia non olet · About LEMON Manuals