LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1409 (Automatic Transmission - AISIN Aw21) >> Disassembly And Assembly Of Subassemblies >> Torque Converter Hub Seal >> Assembly

Torque Converter Hub Seal: Assembly

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the torque converter hub seal in place.
    2. Fig 1: Positioning Torque Converter Hub Seal In Place
    GF0017796Courtesy of FORD MOTOR CO.
  2. Using the Converter Seal Installer, install the torque converter hub seal.
    3. Fig 2: Installing Torque Converter Hub Seal
    GF0017797Courtesy of FORD MOTOR CO.
  3. Install the torque converter.
  4. Install the transaxle. For additional information, refer to Transaxle - 3.0L  or Transaxle - 3.5L .
scientia non olet · About LEMON Manuals