Pinpoint Tests - Non OSC Equipped Vehicle: Notes
WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
| Illustration | Tool Name | Tool Number |
|---|---|---|
| 73 III Automotive Meter | 105-R0057 or equivalent | |
| Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool |
Anytime an electrical connector or solenoid body is disconnected, inspect the connector for pin condition, corrosion and contamination. Also inspect the connector seal for damage. Clean, repair or install a new connector as required.
Prior to carrying out the pinpoint tests, check the following:
- Transmission fluid level
- Transmission fluid condition (burned, metal particles or discolored)
- Engine cooling system
- Other non-related transmission DTCs