LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1402 (Safety Belt System) >> Diagnostic And Testing >> Safety Belt System >> Symptom Chart

Symptom Chart

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Symptom Chart

Condition Possible Sources Action
  • The safety belt warning indicator lamp does not operate
  • Burned-out lamp/LED
  • Circuitry
  • Instrument cluster (IC)
  • Restraints Control Module (RCM)
  • The safety belt warning chime does not operate
  • Safety belt switch
  • IC module
  • RCM
  • Circuitry
  • The safety belt retractor webbing does not extract or exhibits excessive pressure on the occupant during use
  • Safety belt retractor is in Automatic Locking Retractor (ALR) mode
  • Safety belt retractor is binding internally
  • The safety belt retractor webbing does not retract or has excessive slack during use
  • Twisted or incorrectly routed safety belt webbing
  • Safety belt retractor is binding internally
  • Safety belt retractor
  • The Belt-Minder® feature is inoperative
  • Belt-Minder® feature is deactivated
  • Circuitry
  • Safety belt procedure after a collision
  • Safety belt retractors
  • Safety belt buckles
  • Safety belt shoulder height adjuster(s)
  • Center seat safety belt and buckle (lap belt, if equipped)
  • Child safety seat attachment components
  • The safety belt tongue is rotated on the safety belt webbing
  • Twisted or incorrectly routed safety belt webbing
  • The safety belt webbing is twisted at the safety belt guide
  • Twisted or incorrectly routed safety belt webbing
  • The safety belt webbing is dirty or soiled
  • Dirty or soiled safety belt webbing