LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1398 (Handles, Locks, Latches & Entry Systems) >> General Procedures >> Remote Memory Activation

Remote Memory Activation

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the driver seat and mirrors to the desired position.
  2. Press the set button on the driver door panel.
  3. Within 5 seconds press the 1 or 2 button on the driver door panel. This stores the configuration for driver 1 or driver 2.
  4. Press the set button.
  5. Within 5 seconds, press any button on the Integrated Keyhead Transmitter (IKT) and then press the 1 or 2 button on the driver door panel to associate the IKT with that position.
  6. If a second memory setting is desired, repeat the procedure with the second integrated key.
scientia non olet · About LEMON Manuals