Panic Alarm
WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The panic alarm activation can be configured using a scan tool from a single button press to press and hold. Refer to MODULE CONFIGURATION
article.
The panic alarm feature provides audible and visual alarms which are evident from the exterior of the vehicle. The panic alarm feature requests that the turn signals are flashed and the horn sounds until deactivation. The flashing of the outputs occurs simultaneously. Activation of the panic alarm is accomplished by pressing the panic button on an integrated key head transmitter (IKT) whenever the key is in the OFF position. At all other times this feature is disabled. Deactivation of an active PANIC alarm is accomplished by any of the following actions:
- a second press of the IKT panic button
- the key is switched out of the OFF position
- a period of 2 minutes and 45 seconds has elapsed since the initial activation