Keyless Entry Keypad
WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
The keyless entry keypad performs the following functions:
- Unlock the driver door
- Unlock all the doors
- Lock all doors
- Enables/disables auto-unlocking
- Enables/disables auto locking
- Arm/disarm the perimeter alarm (if equipped)
- Recall the memory seat position associated with a particular customer key code (when enabled)
- Release the luggage compartment lid latch
- Programs/erases the customer key code
- Illuminates the keyless entry keypad lamp and issues illuminated entry on/off requests
The keypad feature operates independently of key position status, vehicle speed, or transmission position. When a keypad button is pressed, the keypad buttons illuminate to provide better visibility. If the lock all doors command is entered or 5 seconds have elapsed since the last button press, the illumination is turned off.
Each vehicle equipped with a keypad is programmed with a 5-digit factory set entry code. This code is provided to the customer through a wallet card in the Owner's Literature. In addition, this code is available through a scan tool and is also printed on the SJB label. When entering codes each digit must be entered within 5 seconds of the previous button press.