LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1394 (Seat System - Seating) >> Removal And Installation >> Seat - Exploded View, Rear

Seat - Exploded View, Rear

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Seat backrest with armrest shown, seat backrest without armrest similar.
Fig 1: Exploded View Of Rear Seat With Torque Specifications - 60 Percent
GF0028329Courtesy of FORD MOTOR CO.
Item Part Number Description
1 66801/66601 Backrest foam pad/trim cover
2 N620480 Striker-to-backrest frame nut (4 required)
3 - Backrest latch striker (part of 613A39)
4 - Striker support plate (part of 613A39)
5 67112 Armrest assembly (if equipped)
6 N605892 Armrest-to-backrest bolt (if equipped) (4 required)
7 613A39 Backrest frame
8 N605892 Backrest-to-pivot bolts (4 required)
9 - Backrest pivot assembly (part of 613A39)
10 67112 Rubber insert, armrest cup holder (if equipped)
11 W712494 Armrest pivot bolt (if equipped) (2 required)
12 67210 Armrest bracket (if equipped)
Fig 2: Exploded View Of Rear Seat With Torque Specifications - 40 Percent
GF0028330Courtesy of FORD MOTOR CO.
Item Part Number Description
1 66800/66600 Backrest foam pad/trim cover
2 N620480 Striker-to-backrest frame nut (4 required)
3 - Backrest latch striker (part of 613A38)
4 - Striker support plate (part of 613A38)
5 613A38 Backrest frame
6 - Backrest pivot assembly (part of 613A38)
7 N605892 Backrest-to-pivot bolt (4 required)
  1. For additional information, refer to the procedures.