LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1394 (Seat System - Seating) >> Description And Operation >> Seats >> Rear Seats

Rear Seats

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

These seats are a 60/40 split folding backrest. The 60 percent has a fold down armrest and may be equipped with cup holders. Each backrest is held in place at the top with its own latch attached to the package tray sheet metal and a striker attached to each backrest frame. The rear seat backrest latch release handles are located in the luggage compartment.

The cushion foam pad for an all wheel drive (AWD) vehicle is different than that for a front wheel drive (FWD) vehicle. The center tunnel is higher on an AWD vehicle, creating the need for a shorter cushion foam pad. Make sure when installing a new cushion foam pad, the correct part is being installed.

scientia non olet · About LEMON Manuals