Driver Seat Module (DSM) - Memory Seat

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

The power driver seat, exterior mirrors and adjustable pedal positions are controlled by the driver seat module (DSM) only when the vehicle is equipped with the programmable/recall memory option. The DSM is located on the driver seat track.

This system allows automatic positioning of the driver power bucket seat, exterior power mirrors and adjustable pedals to 2 programmable positions. Memory positions can be stored at any time. A memory recall can be initiated only if the vehicle is in PARK or NEUTRAL and the ignition switch is not in START. A memory recall in progress will not be affected by moving the ignition switch to START or by moving the selector lever out of PARK or NEUTRAL. For information on programming memory positions or recalling stored memory position, refer to Memory Position Programming .