LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1393 (Windows & Glass - Glass, Frames & Mechanisms) >> Diagnostic Tests >> Glass, Frames and Mechanisms >> Pinpoint Tests >> Pinpoint Test A: All Power Windows are Inoperative - MKZ >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Under normal operation, the LH front power window control switch receives power through circuits CBP02 (GN) and CPW30 (GY/YE), which is the accessory delay relay output from the smart junction box (SJB). The accessory delay relay is integral to the SJB module. The LH and RH front power window motors each have their own separate power feeds and grounds and do not share any circuits with the LH or RH rear power window motors, except through the master window control switch.

This pinpoint test is intended to diagnose the following: