Glass, Frames and Mechanisms: Notes
WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The smart junction box (SJB) may also be identified as the generic electronic module (GEM).
The glass, frames and mechanisms consist of:
- window regulators.
- door window regulator motors.
- front door glass top run.
- front door window glass.
- rear door window glass.
- rear window glass.
- rear fixed window glass.
- rear window regulator and motor - run and brackets.
- window control switches.
- accessory delay relay.
- SJB.
- windshield glass.
- heated rear window grid.
- heated rear window grid relay.
The glass, frames and mechanisms include:
- standard plastic and laminate safety glass.
- windshield glass which is bonded to the opening flange with a urethane sealant.
- standard power windows which include one-touch up, one-touch down and lock-out feature (left front only).
The window regulator control switch:
- is located on each door trim panel.
- may be used to manually raise or lower all windows from the left front window control switch or the individual side window from the corresponding individual door switch.
- for Fusion and Milan, can lock out passenger front and rear window control switches when the lock-out switch on the left front window control switch is turned on.
- for MKZ, can lock out rear window control switches when the lock-out switch on the left front window control switch is turned on.
- can manually lower the driver side window when the left front window control switch is pressed and held in the DOWN position.
- can automatically lower the driver side window when the left front window control switch is momentarily pressed to the DOWN position and released.