Principles of Operation: Subwoofer
WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
The subwoofer speakers are powered by the subwoofer amplifier (Audiophile) or by the audio digital signal processing (DSP) module (THX® only). The enable/clip detection circuit carries out 2 functions: to turn the amplifier on, and to indicate to the ACM when the subwoofer output distortion signal reaches a damaging level. The ACM then clips the audio output signal to prevent damage to the subwoofer.