LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1387 (Electronic Engine Control - 3.0L (4V)) >> Removal And Installation >> Heated Oxygen Sensor (HO2S) and Catalyst Monitor Sensor - Exploded View

Heated Oxygen Sensor (HO2S) and Catalyst Monitor Sensor - Exploded View

WARNING: This page is about a different car, the 2009 Mercury Milan and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Front Wheel Drive (FWD) shown, All-Wheel Drive (AWD) similar.
Fig 1: Exploded View Of Heated Oxygen Sensor (HO2S) & Catalyst Monitor Sensor With Torque Specifications
GF0029444Courtesy of FORD MOTOR CO.
Item Part Number Description
1 14A464 Heated Oxygen Sensor (HO2S) electrical connectors
2 9F472 HO2S
3 14A464 Catalyst monitor sensor electrical connectors
4 9G444 Catalyst monitor sensors
  1. For additional information, refer to the procedures.