LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1384 (Engine Cooling System) >> General Procedures >> Cooling System Draining, Filling and Bleeding >> Filling and Bleeding with RADIATOR REFILLER

Filling and Bleeding with RADIATOR REFILLER

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the RADIATOR REFILLER and follow the manufacturer's instructions to fill and bleed the cooling system.
    • Recommended coolant concentration is 50/50 ethylene glycol to distilled water.
      • Maximum coolant concentration is 60/40 for cold weather areas.
      • Minimum coolant concentration is 40/60 for warm weather areas.
      • Fig 1: Installing Radiator Refiller
      G06063031Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals