LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1380 (Hydraulic Brake System Actuation) >> Removal And Installation >> Brake Pressure Control Valve >> Notes

Brake Pressure Control Valve: Notes

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Material

Item Specification
High Performance DOT 3 Motor Vehicle Brake Fluid
PM-1-C (US); CPM-1-C (Canada)
WSS-M6C62-A or WSS-M6C65-A1
NOTE: Non-ABS shown, ABS similar.
Fig 1: Exploded View Of Brake Pressure Control Valve With Torque Specifications
GF0041423Courtesy of FORD MOTOR CO.
Item Part Number Description
1 - Brake tube fittings (part of 9J279)
2 W711239 Brake pressure control valve bolts (2 required)
3 43900 Brake pressure control valve