Brake Fluid Reservoir - 3.5L: Notes
WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Material
| Item | Specification |
|---|---|
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1-C (US); CPM-1-C (Canada) |
WSS-M6C62-A or WSS-M6C65-A1 |
NOTE:
Automatic transmission shown, manual transmission similar.
| Item | Part Number | Description |
|---|---|---|
| 1 | W520111 | Brake fluid remote reservoir nut (2 required) |
| 2 | 2K478 | Brake fluid remote reservoir |
| 3 | - | Spring clamp (part of 2K478) |
| 4 | - | Brake fluid reservoir hose (part of 2K478) |
| 5 | - | Brake fluid level warning switch electrical connector (part of 14290) |
| 6 | - | Spring clamp (part of 2K478) |
| 7 | 2B176 | Brake fluid reservoir pin bolt |
| 8 | 2C246 | Brake fluid reservoir |
| 9 | 2L074 | Brake fluid reservoir seals (2 required) |