LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1380 (Hydraulic Brake System Actuation) >> Removal And Installation >> Brake Fluid Reservoir - 2.3L and 3.0L >> Notes

Brake Fluid Reservoir - 2.3L and 3.0L: Notes

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Material

Item Specification
High Performance DOT 3 Motor Vehicle Brake Fluid
PM-1-C (US); CPM-1-C (Canada)
WSS-M6C62-A or WSS-M6C65-A1
NOTE: Automatic transmission shown, manual transmission similar.
Fig 1: Exploded View Of Brake Fluid Reservoir With Torque Specification - 2.3L and 3.0L
GF0041421Courtesy of FORD MOTOR CO.
Item Part Number Description
1 - Brake fluid level warning switch electrical connector (part of 14290)
2 2B176 Brake fluid reservoir pin bolt
3 2L074 Brake fluid reservoir seal (2 required)
4 2C246 Brake fluid reservoir