LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1378 (Power Steering System) >> Removal And Installation >> Steering Gear - Front Wheel Drive (FWD) >> Notes

Steering Gear - Front Wheel Drive (FWD): Notes

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools

Illustration Tool Name Tool Number
GF0010812Courtesy of FORD MOTOR CO.
Tie-Rod End Remover 211-105 (T85M-3395-A)
Material

Item Specification
MERCON® V Automatic Transmission Fluid
XT-5-QM (or XT-5-QMC) (US); CXT-5-LM12 (Canada)
MERCON® V
NOTE: The 3.0L shown, 3.5L similar.
Fig 1: Exploded View Of Steering Gear With Torque Specifications - Front Wheel Drive (FWD)
GF0041531Courtesy of FORD MOTOR CO.
Item Part Number Description
1 - Pressure line-to-steering gear banjo bolt (part of 3A705)
2 - Power steering pressure line seals (part of 3A705)
3 - Power steering pressure line (part of 3A719)
4 3A713 Steering gear-to-fluid cooler return hose
5 W712155 Pressure line bracket-to-steering gear bolt
6 3C497 Steering gear bolts (3 required)
7 99221 Cotter pin (2 required)
8 6E5C Outer tie-rod end nut (2 required)
9 3504 Steering gear
10 3R827 Steering column shaft-to-steering gear bolt
11 3611B Steering gear/dash seal
12 W704904 Lower steering column shaft joint cover nut (2 required)
13 3611A Lower steering column shaft joint cover
14 391727 Steering gear heat shield
15 3530B Steering gear heat shield bolt (2 required)
16 3C496 Subframe bolt (4 required)
17 W520416 Subframe nut (2 required)