LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1376 (Front Disc Brake System) >> Removal And Installation >> Front Brake Caliper Anchor Plate >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the brake pads. For additional information, refer to BRAKE PADS .
  2. Remove the 2 brake caliper anchor plate bolts.
    • To install, tighten to 90 Nm (66 lb-ft).
  3. Remove the brake caliper anchor plate.
  4. To install, reverse the removal procedure.
    • Apply brakes several times to verify correct brake operation.
scientia non olet · About LEMON Manuals