LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1375 (Information Center - Instrument Cluster (Ic), Message Center, & Warning Chimes) >> General Procedures >> Belt-Minder® Deactivating/Activating >> Preparation

Belt-Minder® Deactivating/Activating: Preparation

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The Belt-Minder® deactivating/activating can also be carried out using the scan tool.
  1. Apply the parking brake before deactivating/activating the safety Belt-Minder®.
  2. Place the gear selector lever in PARK (P) (automatic transaxle) or NEUTRAL (N) (manual transaxle).
  3. Place the ignition switch in the OFF position.
  4. Close all the vehicle doors.
  5. Unbuckle the driver and the front passenger safety belts.
scientia non olet · About LEMON Manuals