Safety Belt Warning Chime
WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
The safety belt warning chime warns that the safety belt is not fastened. The safety belt warning chime sounds when the driver or passenger safety belt is not fastened and the ignition lock cylinder is turned from the OFF/LOCK or ACC to the ON or START position.
The safety belt warning chime stops sounding when the safety belt is fastened, when the ignition lock cylinder is turned from the ON or START position to the OFF/LOCK or ACC position, or when the chime has sounded for approximately 6 seconds.
The safety belt warning chime inputs are the:
- Ignition switch RUN/START position
- Driver or passenger safety belt switch data communicated by the restraints control module (RCM) to the instrument cluster (IC) through the controller area network (CAN)