LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1375 (Information Center - Instrument Cluster (Ic), Message Center, & Warning Chimes) >> Diagnostic Tests >> Instrument Cluster (IC), Message Center and Warning Chimes >> Principles of Operation >> Instrument Cluster >> Instrument Cluster (IC) Prove-Out

Instrument Cluster (IC) Prove-Out

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

The instrument cluster (IC) and other vehicle modules carry out a display prove-out to verify that all module controlled warning/indicator lamps and monitored systems are functioning correctly within the instrument cluster (IC). The instrument cluster (IC) and other modules such as the restraints control module (RCM) provide a timed prove-out while other indicators illuminate until engine start up. When the ignition switch is cycled to the ON position with the engine off, the indicators illuminate to prove-out according to the following table:

Indicator Indicator Type Prove-Out Duration
ABS Warning 3 seconds
Air bag Warning 6 seconds on/2 seconds off
Anti-theft Indicator Approx. 3 seconds
Brake Warning 3 seconds
Charging system Warning Engine startup
Check fuel cap Informational 3 seconds
Door ajar Warning None
High beam Informational None
Low fuel Informational 3 seconds
Low oil pressure Warning Engine startup
Malfunction indicator lamp (MIL) Warning Engine startup
Safety belt Warning 70 seconds or until the safety belt is fastened
Speed control Informational None
Tire pressure monitoring system (TPMS) Warning 3 seconds
Traction assist Warning 3 seconds
Powertrain malfunction (wrench) Informational 3 seconds
RH/LH turn Informational None