LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1373 (Exterior Lighting System) >> General Procedures >> AUTOLAMPS Time Delay Adjustment

AUTOLAMPS Time Delay Adjustment

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Steps 2 through 5 must be carried out within a 10-second period.
  1. Start with the ignition switch off and the headlamp switch in the AUTOLAMPS ON position.
  2. Place the headlamp switch in the OFF position.
  3. Place the ignition switch in the RUN position.
  4. Place the ignition switch in the OFF position.
  5. Place the headlamp switch in the AUTOLAMPS ON position. The exterior lamps turn on at this point.
  6. Wait the desired amount of time and place the headlamp switch in the OFF position (maximum of 3 minutes). The exterior lamps turn off and the autolamp time delay is now set.