LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1373 (Exterior Lighting System) >> Diagnostic Tests >> Turn Signal And Hazard Lamps >> Pinpoint Tests >> Pinpoint Test N: One Turn Signal/Hazard Lamp Is Inoperative/Always On >> Normal Operation - Fusion

Normal Operation - Fusion

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

When the smart junction box (SJB) detects the multifunction switch in the LH TURN position, the SJB provides on/off voltage through circuit CLS21 (BU/GN) to the LH front turn lamp. When the SJB detects the multifunction switch in the RH TURN position, the SJB provides on/off voltage through circuit CLS25 (YE/VT) to the RH front turn lamp. Circuits GD123 (BK/GY) and GD121 (BK/YE) provide ground for the LH and RH front turn lamps, respectively. The rear turn lamps are controlled utilizing the rear stoplamp circuitry.

scientia non olet · About LEMON Manuals