LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1373 (Exterior Lighting System) >> Diagnostic Tests >> Parking, Rear And License Plate Lamps >> Principles of Operation

Principles of Operation

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The smart junction box (SJB) is also known as the generic electronic module (GEM).

The SJB monitors the headlamp switch position by sending voltage reference signals on multiple circuits to the headlamp switch. At any given time, one of the signal circuits is routed to ground. If the SJB detects any concern with the inputs from the headlamp switch for 5 seconds, the SJB may turn on the exterior lights and keep them on for 10 minutes after the ignition switch is turned off (or 10 minutes from the time the SJB detects any headlamp switch input concern if the ignition switch was already off).

If the SJB detects a concern with the headlamp switch inputs, the SJB implements a planned strategy depending on the inputs received. If this situation occurs, the SJB should NOT  be ruled immediately as being at fault. This is normal behavior of the SJB design as it has detected a fault with the inputs from the headlamp switch.

When the SJB receives an input from the headlamp switch indicating a request for the parking lamps, the SJB energizes the parking lamp relay, which supplies voltage to the exterior lamps.