LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1365 (Rear Drive Axle/Differential) >> In-Vehicle Servicing >> Differential Housing Cover >> Removal

Differential Housing Cover: Removal

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
  2. Remove the 10 bolts and the rear differential housing cover.
    • Drain the differential fluid from the housing.
    3. Fig 1: Locating Rear Differential Housing Cover Bolts
    GF0029549Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals