Crankshaft Pulley: Removal

WARNING: This page is about a different car, the 2009 Lincoln MKZ. However, it is still accessible from the selected car via links, so may be relevant.

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
Remove the accessory drive belt and the power steering belt. For additional information, refer to ACCESSORY DRIVE - 3.5L article.
Using the Strap Wrench, remove the crankshaft bolt and washer.
- Discard the bolt.

Fig 1: Removing Crankshaft Bolt & Washer Using Special Tool (303-D055)

Courtesy of FORD MOTOR CO.

Using the 3-Jaw Puller, remove the crankshaft pulley.

Fig 2: Identifying Special Tools (303-D121) And Crankshaft Pulley

Courtesy of FORD MOTOR CO.