LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1355 (Steering System - General Information) >> General Procedures >> Power Steering System Filling - 2.3L

Power Steering System Filling - 2.3L

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Material

Item Specification
MERCON® V Automatic Transmission Fluid
XT-5-QM (or XT-5-QMC) (US); CXT-5-LM12 (Canada)
MERCON® V
  1. Inspect the power steering fluid level and add fluid to the specified level as necessary.
  2. Start the engine and inspect for fluid aeration. If fluid aeration is evident, carry out the power steering system purging procedure. For additional information, refer to Power Steering System Purging - 2.3L .