LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1351 (Engine System - General Information) >> General Procedures >> Valve Stem Diameter

Valve Stem Diameter

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to the appropriate Engine article for the specification.
  1. Measure the diameter of each intake and exhaust valve stem at the points shown. Verify the diameter is within specification.
  2. Fig 1: Measuring Diameter Of Valve Stem
    GF0000205Courtesy of FORD MOTOR CO.