LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1351 (Engine System - General Information) >> General Procedures >> Piston To Cylinder Bore Clearance

Piston To Cylinder Bore Clearance

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Refer to the appropriate Engine article for the specification.

  1. Subtract the piston diameter from the cylinder bore diameter to find the piston-to-cylinder bore clearance.
scientia non olet · About LEMON Manuals