LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1351 (Engine System - General Information) >> General Procedures >> Cylinder Bore Out-of-Round

Cylinder Bore Out-of-Round

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Refer to the appropriate Engine article for the specification.

  1. Measure the cylinder bore in 2 directions. The difference is the out-of-round.
    Fig 1: Measuring Cylinder Bore
    G06064070Courtesy of FORD MOTOR CO.