LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1245 (Anti-Theft System - Perimeter) >> Removal And Installation >> Anti-Theft Alarm Horn >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Remove the RH rear quarter trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  3. Disconnect the anti-theft alarm horn electrical connector.
  4. Remove the screw and the anti-theft alarm horn.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals