Exhaust Gas Recirculation (EGR) System Module (ESM)

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2009 Mercury Mountaineer, 2009 Mercury Milan, 2009 Mercury Mariner, 2009 Mercury Grand Marquis, and 2009 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

The ESM is an integrated differential pressure feedback EGR system that functions in the same manner as a conventional differential pressure feedback EGR system. The various system components have been integrated into a single component called the ESM. The flange of the valve portion of the ESM bolts directly to the intake manifold with a metal gasket that forms the metering orifice. This arrangement increases system reliability, response time, and system precision. By relocating the EGR orifice from the exhaust to the intake side of the EGR valve, the downstream pressure signal measures manifold absolute pressure (MAP). This MAP signal is used for EGR correction and inferred barometric pressure (BARO) at ignition on. The system provides the PCM with a differential pressure feedback EGR signal, identical to a traditional differential pressure feedback EGR system.

Fig 1: Identifying Exhaust Gas Recirculation System Module (ESM)

Courtesy of FORD MOTOR CO.

ITEM DESCRIPTION

Item	Number	Description
1	-	Exhaust Flow
2	-	Upstream Differential Pressure Feedback EGR Port
3	-	Differential Pressure Feedback EGR and MAP Sensor
4	-	EGR Vacuum Regulator Integrated into Upper Body
5	-	Downstream Differential Pressure Feedback EGR Port
6	-	To Intake Manifold Plenum