LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1183 (Engine Controls - Description & Operation (Except Diesel & Hybrid)) >> Engine Control Components >> Air Conditioning Pressure (ACP) Transducer Sensor

Air Conditioning Pressure (ACP) Transducer Sensor

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2009 Mercury Mountaineer, 2009 Mercury Milan, 2009 Mercury Mariner, 2009 Mercury Grand Marquis, and 2009 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

The ACP transducer sensor is located in the high pressure (discharge) side of the A/C system. The ACP transducer sensor provides a voltage signal to the PCM that is proportional to the A/C pressure. The PCM uses this information for A/C clutch control, fan control and idle speed control.

Fig 1: A/C Pressure Transducer Sensor Voltage Output Pressure Chart
G06053851Courtesy of FORD MOTOR CO.
Fig 2: Typical ACP Transducer Sensor
G06053852Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals