LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake Actuation >> Removal And Installation >> Brake Fluid Reservoir - 3.5L >> Notes

Brake Fluid Reservoir - 3.5L: Notes

Material

Item Specification
High Performance DOT 3 Motor Vehicle Brake Fluid
PM-1-C (US); CPM-1-C (Canada)
WSS-M6C62-A or WSS-M6C65-A1
NOTE: Automatic transmission shown, manual transmission similar.
Fig 1: Exploded View Of Brake Fluid Reservoir With Torque Specifications - 3.5L
GF0041422Courtesy of FORD MOTOR CO.
Item Part Number Description
1 W520111 Brake fluid remote reservoir nut (2 required)
2 2K478 Brake fluid remote reservoir
3 - Spring clamp (part of 2K478)
4 - Brake fluid reservoir hose (part of 2K478)
5 - Brake fluid level warning switch electrical connector (part of 14290)
6 - Spring clamp (part of 2K478)
7 2B176 Brake fluid reservoir pin bolt
8 2C246 Brake fluid reservoir
9 2L074 Brake fluid reservoir seals (2 required)